Lucity's IPT Monitoring Points module stores information about the locations within an IPT facility where waste sampling tests and analysis are performed. For example, a monitoring point might be a tank, trough or pipe.
The Monitoring Points module also:
lists the parameters that are tested at each monitoring point and limits for those parameters at that point;
provides a historical record of past tests; and
tracks and stores information used to bill facilities for IPT tests.
Common Tasks
To open thismodule, selectEnvironmental Compliance > Industrial Pretreatment > Monitoring Points.
Method 1: Add a Monitoring Point from the IPT Facility Module
Click the button next to the IPTFacility record to which you want to add a monitoring point.
Select the Monitoring Point grid and click the button. A new record appears with the IPT Facility field displaying the ID for the associated Facility.
Enter a name or code to identify the test location in the Monitoring Point field (required).
This Monitoring Point may be used only once for the current Facility. Therefore, the combination of IPT Facility and Monitoring Point must form a unique combination.
Continue to Filling out the Record....
Method 2: Add a Monitoring Point from the IPT Monitoring Points Module
Open the IPT Facility Monitoring Point module.
Click the button. A new record appears.
Enter or select the IPT Facility to which you want to create the monitoring point (required).
Enter a name or code to identify the test location in the Monitoring Point field (required).
The combination of IPT Facility and Monitoring Point must form a unique combination.
Continue to Filling out the Record....
Filling Out the Record
Complete other fields as desired.
Save and close the record. The Monitoring Point now appears in the grid.