Pipe Ratings

Pipe Ratings are recorded in the Pipe Analysis Details dialog as follows:

1. For PACP records, a defect can only be either a Structural defect or an O&M defect. This corresponds to the way in which observations are recorded in the PACP Inspection module.
2. For TV Inspection records, the process for assigning a rating is as follows:
   • The rating from the TV Observation will be used. In the example below, the rating is a 3.

     

   • The rating will be assigned either or both the Structural Rating and/or O&M Rating depending on the Structural # and Cleaning # for that defect. If either value is greater than 0, then that Rating is assigned in the Pipe Analysis Details dialog.