Set-up Tab

Field Name

Use/Purpose

Date Televised

Use this field to record the date and time the segment was televised.

TV Direction

Use this field to record the direction the segment was televised (i.e. upstream to downstream or downstream to upstream).

Inspection Crew

Record the name, number, or initials or the crew performing the inspection.

Weather

User-defined pick list allowing you to record the weather conditions at the time of the inspection.

Surface Condition

User-defined pick list allowing you to describe the type of surface on the ground above the pipe being observed.

Dyed Water

Use this field to indicate whether a dyed-water test was performed during the inspection.

Percent Full

The percentage of the pipe cross-section area that is occupied by the flow.

Purpose

User-defined pick list allowing you to define the purpose of the TV inspection (i.e. TV existing line, TV rehabilitated line, TV new line).

Flow Type

Type of flow observed during the inspection (i.e. added flow, normal flow, no flow).

Tape ID Number

The identification number assigned to the tape used for televising the line segment.

Counter Start and Stop

The numbers on the tape's counter at the beginning and end of the inspection.

Clean Prior Checkbox

Indicate whether the pipe has been jet or bucket cleaned prior to the inspection.

Degrease Prior Checkbox

Indicate whether the pipe has been degreased prior to the inspection.

Point Repair Prior Checkbox

Indicate whether the pipe has been repaired prior to the inspection.

Struc Replace Prior Checkbox

Indicate whether the manhole was replaced prior to the inspection.

Root Cut Prior Checkbox

Indicate whether roots have been cut from the wall of the pipe prior to the inspection.

Root Chem Prior Checkbox

Indicate whether a chemical treatment was used to control root growth prior to the inspection.

Other Main Prior

Text field allowing you to indicate any other maintenance performed on the pipe prior to the inspection.