Readings Tab

The Readings tab allows you to view previous meter readings for a pump. At a glance, you can view each meter reading and the date it took place. In addition, this tab displays the date of the most recent pump reading along with the meter reading values. These fields are updated automatically each time a new pump reading is added to this asset.

Although most meter readings are created in the Pump Readings module, you can add a meter reading from here. This expedites the entering process as the pump identification information and previous reading data will be entered when the new record is initially created; however, if you are entering multiple records, we recommend using the Pump Readings module instead.

Adding a Readings Record

To add a Pump Reading Record, complete the following steps:

  1. Right-click in the Readings grid and select Add Record. The Pump Readings module will open allowing you to add the meter data.
  2. Click to save the record.
  3. Click to escape Add Mode.
  4. Click to close the window.

To view or edit a readings record, Right-click on the record and select View Record or Edit Record.  For further information on the Pump Readings module and its tabs, please reference the Sewer Pump Readings help guide.

See Also

Pump Inventory

Sewer Pump Header Data

Pumps Tab

Curve Tab

Motor and Seal Tab

Plates Tab

Status/Construction History Tab

Location History Tab

Equipment Tab

Inspections Tab

Purch/Warr Tab

WO/PM

Custom and Comments