the Attributes Tab stores some general information about the extractor. It also has several special function fields that interact with pump out records.
Field |
Function |
% Full Violation 1 |
The percent full the extractor needs to be at one point, to be in violation. This is used during an inspection to automatically calculate if a violation has occurred. Note: Violation 1 refers to the measurement at the inlet, but can be used for any measurement desired. |
% Full Violation 2 |
The percent full the extractor needs to be at one point, to be in violation. This is used during an inspection to automatically calculate if a violation has occurred. Note: Violation 2 refers to the measurement at the outlet, but can be used for any measurement desired. |
Last Cleaning Date |
Automatically updated from the Action Date on the latest Pumpout/Cleaning record. |
Cleaning Freq |
How often a extractor needs to be cleaned |
Cleaning Freq Units |
They type of unit the Cleaning Freq represents |
Next Cleaning Date |
Calculated from the Last Cleaning Date, Clean Freq, and Cleaning Freq Units. Used to update the Next Cleaning date field on the facility record. |