Default Task Cost

In the upper-right corner of the Rehab Work Tasks and Costs module you'll see seven Default Task Cost fields. These are pictured below:

You'll use the top six fields to record the cost per foot to perform the rehabilitation work task in this record on each of six different pipe classifications listed below (for pipes up to 10 feet deep).

• Easy Access/Unpaved Pipes
• Difficult Access/Unpaved Pipes
• Easy Access/Paved Pipes
• Difficult Access/Paved Pipes
• Easy Access/Heavy Traffic Pipes
• Difficult Access/Heavy Traffic Pipes

  Note: Pipes are assigned to these categories using the parameters established in the Accessibility and Surface Types setup modules.

You'll also see a Cost per each VF > 10 ft field. Use this field to record the cost per vertical foot to perform the rehabilitation work task in this record for pipes at a depth in excess of 10 feet. The model will use the pipe's average depth when calculating this cost.