The Storm Conduit header fields contain general information used to identify, describe, and locate each structure. The header appears at the top of the module window and remains visible as users navigate through the module's tabs.
Field |
Function |
Alt Conduit ID * |
The user-defined, unique ID for each conduit. |
Conduit Rec # |
A system-generated ID number for the record. |
Basin |
Specifies the basin number for the upstream drainage structure. |
From End Type |
Indicates which module the US Structure comes from (Storm Structure, Pump Station, Node, Control Valve, System Valve, or Discharge Point). |
To End Type |
Indicates which module the US Structure comes from (Storm Structure, Pump Station, Node, Control Valve, System Valve, or Discharge Point). |
US Structure
|
Displays the ID and address for the asset that the conduit connects to at its upstream or 'from' end. This endpoint could be a structure, pump station, node, control valve, or system valve. The source module for this record depends on the From End Type. After setting the From End Type, click the field caption button or press F9 for list of related records. |
DS Structure |
Displays the ID and address for the asset that the conduit connects to at its downstream or 'to' end. This endpoint could be a structure, pump station, node, control valve, or system valve. The source module for this record depends on the To End Type. After setting the To End Type, click the field caption button or press F9 for list of related records. |
Con. to Sewer Check box |
Indicates that the downstream structure is a sanitary connection, rather than a storm connection. |
Active |
Specifies whether the structure is currently in use, proposed or abandoned. |
* Required field.
Special Buttons
|
The Next US and Next DS buttons enable users to navigate through the filtered set of Conduit Inventory records while viewing only the records that are directly upstream or downstream from the current Conduit record. If conduits branch off in multiple directions, the system will prompt the user to choose which direction to follow.
Note: When using a filter, users may encounter a pipe that isn't in the filter. In such cases, the following error is displayed:
|
