Data from the following modules can be viewed in the map using the Module Spatial Data tool:

• Sewer
  • Pipe TV Inspections
  • Pipe CCTV Assessment
  • Pipe Smoke Tests
  • Building Inspections
  • Overflows
• Storm
  • Conduit TV Inspections
  • Conduit CCTV Assessment
• Street
  • Routes
  • Sidewalk Inspections
• Water
  • Flushing Routes
  • Mainbreaks
  • Raw Mainbreaks
  • Recycled Mainbreaks
• Work
  • Work Requests
  • Work Orders
  • Work Permits
  • PM/Templates
  • Master Projects
  • Projects

Requires the GIS > Lucity GIS > Module Spatial Setup - Edit/Delete permission.

1. Click the button. The following dialog appears:

   

2. Use the Select Module drop down to select which module this layer is for. The dialog will expand:

   

3. Filter Results:
   1. Click Select Filter to select a filter. More information about acquiring filters.
   2. Select Limit results to current map extent to only display results that would show up in the current bounds displayed in the map.
4. Configure desired fields:
   1. In the Properties tab, select any additional fields that should be included in the results.

      

   2. Use Select Module to identify which part of the record the field comes from.
   3. Use Select Field to pick one or more fields to add to the results. Check the box next to each desired field.
5. Configure layer properties in the Rendering tab:
   1. Enter the Layer Title that should be displayed in the Table of Contents.
   2. For simple rendering/symbology select a Symbol Color.
   3. For more complex rendering/symbology mark the Color code based on field box.
      • Select a Field on which to base the rendering/symbology.
      • Click on the Color Palette to select a different set of colors.
      • Click Assign Colors to assign specific colors to specific field values.

      More information about rendering/symbology

   4. If desired change the number in the Symbol Size field.
   5. If desired set the Auto Refresh Interval to make the layer automatically update with new data.
6. Edit the information under Save Setup tab if desired.
   1. Enter a Setup Name and Setup Description.
   2. Click Save to store the configuration. You will be able to load the configuration later.
7. Click Load. The spatial data is loaded into the map and will appear in the Table of Contents.

Requires the GIS > Lucity GIS > Module Spatial Setup - Edit/Delete or GIS > Lucity GIS > Module Spatial Setup - Edit/Delete My Own permission.

1. Click the button. The following dialog appears:

   

2. Click Select Existing. The dialog will expand.

   

3. Select an Existing Setup. If needed use the Show only setups assigned to this GIS View and Show my setups only boxes to limit the number of options.
4. A the dialog will expand and will look similar to the following:

   

5. Filter Results:
   1. Click Select Filter to select a filter. More information about acquiring filters.
   2. Select Limit results to current map extent to only display results that would show up in the current bounds displayed in the map.
6. Configure desired fields:
   1. In the Properties tab, select any additional fields that should be included in the results.

      

   2. Use Select Module to identify which part of the record the field comes from.
   3. Use Select Field to pick one or more fields to add to the results. Check the box next to each desired field.
7. Configure layer properties in the Rendering tab:
   1. Enter the Layer Title that should be displayed in the Table of Contents.
   2. For simple rendering/symbology select a Symbol Color.
   3. For more complex rendering/symbology mark the Color code based on field box.
      • Select a Field on which to base the rendering/symbology.
      • Click on the Color Palette to select a different set of colors.
      • Click Assign Colors to assign specific colors to specific field values.

      More information about rendering/symbology

   4. If desired change the number in the Symbol Size field.
   5. If desired set the Auto Refresh Interval to make the layer automatically update with new data.
8. Edit the information under Save Setup tab if desired.
   1. Enter a Setup Name and Setup Description.
   2. Click Save to store the configuration. You will be able to load the configuration later.
9. Click Load. The spatial data is loaded into the map and will appear in the Table of Contents.

Requires the GIS > Lucity GIS > Module Spatial Setup - Edit/Delete or GIS > Lucity GIS > Module Spatial Setup - Edit/Delete My Own permission.

1. Click the button.
2. Click Select Existing. The dialog will open:

   

3. Select the Existing Setup that needs to be removed. If needed use the Show only setups assigned to this GIS View and Show my setups only boxes to limit the number of options.
4. A the dialog will expand and will look similar to the following:

   

5. Open the Save Setup tab.
6. Click Delete. The dialog closes and the saved layer setup is deleted.

1. Open the GIS View that needs an assigned Module Spatial Layer.
2. Click the button.
3. Click Select Existing. The dialog will expand.

   

4. Select an Existing Setup. If needed use the Show only setups assigned to this GIS View and Show my setups only boxes to limit the number of options.
5. A the dialog will expand and will look similar to the following:

   

6. Open the Save Setup tab.
7. Click Assign to add it to the current GIS view.
8. Click Cancel to close the dialog. The Module Spatial Layer will appear the next time the GIS View is loaded.