The header fields contain general information to identify, describe, and locate each structure. It appears at the top of the module window and remains visible as users navigate through the module's tabs.
Field |
Function |
Alt Conduit ID * |
This is the user-defined unique ID for each conduit. |
Conduit Rec # |
An ID number automatically populated by the system. |
Basin |
This field allows users to specify the basin number for the upstream drainage structure. |
From End Type |
Indicates which modules the US Structure comes from. This could be a Storm Structure, Pump Station, Node, Control Valve, or System Valve. |
To End Type |
Indicates which modules the US Structure comes from. This could be a Storm Structure, Pump Station, Node, Control Valve, or System Valve. |
US Structure
|
The US Structure ID displays the ID and address for the asset the conduit connects to at its upstream or 'from' end. This endpoint could be a structure, pump station, node, control valve, or system valve. Which module this record comes from depends on the From End Type. After setting the From End Type click the field caption button or press F9 for list of related records. |
DS Structure |
The DS Structure ID displays the ID and address for the asset the conduit connects to at its downstream or 'to' end. This endpoint could be a structure, pump station, node, control valve, or system valve. Which module this record comes from depends on the To End Type. After setting the To End Type click the field caption button or press F9 for list of related records. |
Con. to Sewer Check box |
This box should be marked if the downstream structure is a sanitary connection instead of a storm connection. |
Active |
This box is used to mark if the Structure is currently in use. This differentiates between structures in use, and proposed or abandoned structures. |
* Required Field
Special Buttons
|
These buttons allow users to navigate through the filtered set of Conduit Inventory records viewing only the records that are directly upstream or downstream from the current conduit record. If conduits branch off in multiple directions, a window will appear prompting them to choose which direction to go.
Note: When using a filter users may come across a pipe that isn't in the filter. The following error will be displayed.
|
