The system calculates the blended values based on data in the subsegment records linked to this supersegment. These Blended values are used by default as the PCI values for the supersegment during a model run.
Field |
Source |
Blended PCI |
For each Subsegment, the system calculates the Inventory PCI x Total Area. The system then sums these values and divides the sum by the total area of the Supersegment. This new value is the blended (or average) PCI.
|
B Load Factor B Non-Load Factor B Environ Factor |
The Load, Non-Load, and Environmental Factors are carried over by the system from the PCI tab of the related Field Inspections. These represent the sum of the Final Deduct values from the Distresses tab for each Load, Non-Load, and Environmental Distress Type. Note: The Factors (not Ratings) are used by the model run when the "Combination of PCI and Factors" is set to Required in the Rehab Per Pavement/Classification module. |
B Structural Factor B Roughness Factor |
The Structural and Roughness Factors are carried over by the system from the PCI tab of the related Field Inspections. These represent the user-entered Initial Strength and Initial Roughness PCI values. Note: The Factors (not Ratings) are used by the model run when the "Combination of PCI and Factors" is set to Required in the Rehab Per Pavement/Classification module. |
B Load Rating |
Ratings = (B Load Factor * Supersegment Area) / 10,000 |
B Non-Load Rating |
Ratings = (B Non-Load Factor * Supersegment Area) / 10,000 |
B Environ Rating |
Ratings = (B Environ Factor * Supersegment Area) / 10,000 |
B Structural Rating |
Ratings = (B Structural Factor * Supersegment Area) / 10,000 |
B Roughness Rating |
Ratings = (B Roughness Factor * Supersegment Area) / 10,000 |
Note: Each distress can be assigned to one of the factors listed above (load, non-load, environmental, etc.) in the Pavement Setup, Pavement Distresses module.
Note: If all of the fields are blank and have yet to be calculated by the system, use the Toolkit function to make the calculations.