The Attributes tab stores information regarding the physical make-up of the facility, such as the cathodic protection, capacity, telemetry, and the exterior and interior paint systems. In addition, this tab contains two fields with special functions. These are described in the table below:
Field Name |
Special Function |
Project Number |
This field allows you to identify the construction project number under which this storage facility was created. Press F9 or click the field caption button to access the pick list. This list comes from the Construction Records module. Note: You cannot add a construction project number from this module. Construction projects must be added in the Construction Records (Construction Records, http://support.lucitycom/downloads/helpmovies/675/Sewer/constructionrecods.wrf) module. This field only allows you to enter valid, pre-defined, project numbers. |
Pipe Number |
This field allows you to identify the water pipe that this inventory item is attached to. Press F9 or click the field caption button to access the pick list. This list comes from the Pipes Inventory module. |
Plant ID |
Links the Storage Facility Inventory record to a record in the Plant Inventory. The storage facility record is actually linked to a Plant Process record but this field must be filled out before the Process field. Click on the field name or press F9 within a field for a list of vehicles. |
Process |
Links the Storage Facility Inventory record to a record in the Plant Process Inventory. The Plant ID field must be filled out before this field can be. Click on the field name or press F9 within a field for a list of vehicles. |