The Sampling Setup Detail Tests module stores lists of contaminants that should be measured during a Sewer Sampling. After an agency creates lists in this module, they are loaded into the Sewer Sampling module's Detail Test Results tab.
Module Toolbar
More information about the tools available in this module
Note: To view an explanation of any field, Ctrl + right click in that field.
|
To access the Sampling Setup Detail Tests module, select Sewer > Inspection > Sampling Setup Detail Tests. The following window appears:
Header Data
The header fields contain general information to identify each list of contaminates that are tested for. The header appears at the top of the module window.
Field |
Function |
Checklist Rec # |
The system-generated ID number for this list. |
Checklist Name ** |
The unique name used to identify the checklist when it appears in the Sewer Sampling module. |
* Required.
* Must be unique.
Checklist Items Tab
The Checklist Items tab contains a grid that stores the individual checklist items associated with this list.
A sample of the grid appears below.
appear at the bottom of the grid. Select a checklist item in the grid and use the up/down arrows to change its position in the checklist.
How to load an Inspection Checklist
