Monitoring Tab

The Monitoring tab features five different groupings of fields that allow you to document the motor and seal condition, as well as electrical monitoring, vibration monitoring, temperature monitoring, and rotational monitoring details. These fields are described below:

Inspection By

This field allows you to to choose who performed the inspection from a pick list. To access the pick list, click on the field caption button or press F9.

Condition

Description

Motor Condition

Code-description pick list used to rate the pump motor's condition.

Seal Condition

Code-description pick list used to rate the pump seal's condition.

Electrical Monitoring

Description

Volts

The voltage of each leg on a three phase motor.

L.R. Amps

The locked rotor amperes on each leg on a three phase motor.

Running Amps

The running amperes of each leg on a three phase motor.

Vibration Monitoring

Description

VM Pump

The vibration reading in inches per second at the pump.

VM Motor

The vibration reading in inches per second at the motor.

VM Shaft

The vibration reading in inches per second at the shaft.

VM Reducer

The vibration reading in inches per second at the reducer.

VM Frame

The vibration reading in inches per second at the frame.

Temperature Monitoring

Description

TM MCC

The temperature reading in degrees fahrenheit on the motor controller.

TM Motor

The temperature reading in degrees fahrenheit on the motor.

TM Bearing

The temperature reading in degrees fahrenheit on the bearing.

TM Lighting

The temperature reading in degrees fahrenheit on the lighting.

Rotational Monitoring

Description

1st Speed

The motor revolutions per minute.

2nd Speed

If the motor has two speeds, record the second speed in this field.

See Also

Pump Inspections

Water Pump Inspections Header Data

Schedule Tab

Custom and Comments