The Attributes tab stores general information about the pump, such as the manufacturer, model and serial numbers, and installation data. You can also record physical characteristics of the pump such as the pump's capacity, dimensions, type, impeller information, and data about the pump's suction end and discharge end. Several fields in this tab have special functions. These fields are described in the table below.
Field Name |
Special Functions |
Location |
The Location field is automatically populated from the Pump Station Inventory module. It contains the slot location of the pump station in which this pump is installed. |
Project Number |
This field allows you to identify the construction project number under which this pump was created. Press F9 or click the field caption button to access the pick list. This list comes from the Construction Records (Construction Records, http://support.lucitycom/downloads/helpmovies/675/Sewer/constructionrecods.wrf) module. Note: You cannot add a construction project number from this module. This field only allows you to enter valid, pre-defined project numbers. |
Status |
This field displays the operating status for the pump (i.e. operational, not-operational). When you enter a status code and description in this field, a new record will automatically be added to the Status History tab. Also, when the status is changed via the Status History tab, this field will be automatically updated to reflect the change. |