Inlet Inspections

The Inlet Inspections grid houses a list of inlet inspections. This grid can also be seen in the Structure Inventory module (under the NPDES tab). You can sort items in the grid by clicking on the headings at the top of the grid. An up or down arrow will appear signifying ascending or descending order. Click the heading again to change the direction.

Inlet Inspections

Adding an Inspection

To add an inlet inspection record, complete the following steps:

  1. Right-click in the grid and select Add Record. The following window will appear:

    Inlets

  2. Enter the inlet number. This is the only required field.
  3. Select the Facing code. This is the direction in which the inlet faces (north, south, etc.).
  4. Record the inlet width, length, and catchment area (the area upstream of each inlet).
  5. Enter the C Coefficient. This is the runoff coefficient of the area draining to the inlet.
  6. Enter the % Impervious. This is the percentage of area upstream of the structure that is impervious.
  7. Record the average slope of the inlet and the inlet grade.
  8. Click to save the record.
  9. Click to exit Add Mode.
  10. Click to close the window.

View, Edit, or Delete Records

To view, edit, or delete an inspection record, Right-click on the record and select View Record, Edit Record, or Delete Record.

See Also

Structure Inspections

Storm Structure Inspection Header Data

General 1 Tab

General 2 Tab

Custom and Comments