Installing a Pump

1. Right click on the slot where the pump is installed and select Install Pump. The following window will appear:

   

2. Enter the Date. This is required.
3. Enter the Pump Number of the pump to install.  This is required.  Click the field caption or click in the field and press F9 or for a list of available pumps.

   Note: Only pumps in the Sewer Pump Inventory module that are not already associated with a pump station will be available.

4. Enter the meter reading at the time of the install. 

   Note: The Action field is automatically populated.

5. Enter any additional comments in the grid.
6. Save and close the window

   Note: When a Pump is installed the Slot Number and Location will be carried over to the corresponding fields in the Pump Inventory record.