Observations

1. Right-click in the grid and select Add Record. The following dialog will appear:

   

2. Record the Distance to the feature location. This distance can be measured in feet or meters.

   Note: This field is required.

3. Use the Defect field to select the defects Code/Description. Click the caption button or click in the find and press F9 for a picklist.

   Note: These codes comply with the NAASCO PACP standards and are used to calculate the read-only Structural and O&M fields in this record.

   Note: This field is required.

4. Fill out the other fields as needed.
5. Save and Close the record. For more information about Observation records go here.