The Inspection Setup tab fields allow you to document when the TV inspection occurred, the conditions possibly affecting the inspection, and the purpose of the inspection along with prior maintenance. Several fields in this module have a unique purpose. These fields are described below:
Field Name |
Definition |
Date Inspected |
The date the conduit was inspected. Note: This field is required in order to save the record. |
Inspec Dir |
The direction of the inspection, i.e. whether the inspection started from the upstream or downstream structure. Note: This field is required in order to save the record. |
Struc Insp. From |
This field is automatically populated by the system when you select the Inspection Direction. This field identifies the structure where the inspection starts. |
Percent Full |
What percentage of the conduit was full of water or debris. |
Tape ID |
The identification number of the tape used in a TV inspection. |
Counter Start Counter Stop |
The numbers on the tape counter where the conduit inspection begins and ends. |