Field Name |
Definition |
Sump Pit Type |
The Sump Pit Type field allows you to specify the type of sump pit being observed. |
Sump Pit Sealed |
The Sump Pit Sealed field allows you to specify if the sump pit is sealed or unsealed. |
Sump Pit Condition |
The Sump Pit Condition field allows you to specify the condition of the sump pit (e.g. dry, wet, or active water). |
Drains Laundry Drains Basement |
Indicates if the sump pit drains the laundry area or basement floor. |
Foundation Conn |
Indicates if the foundation drains are connected. |
Sump Pit Drain Pump Exists Diverter Valve |
Use these fields to indicate if a drain, diverter valve, and/or pump exists in the sump pit. |
Discharge Point |
Use this code-description pick list to identify the pump's discharge point. This could be a sanitary sewer, outside, sump drain, etc. |
Sump Status |
The Sump Status field is automatically populated based on the values entered in the following fields: Sump Pit Type, Sump Pit Sealed, Discharge Point, Sump Pit Drain, Diverter Valve, Sump Pit Sealed. |
Flow Rate (gpm) |
The Flow Rate (gpm) is a calculated field based on the data in the following fields: Sump Pit Type, Sump Pit Sealed, Discharge Point, Sump Pit Drain, and the Diverter Valve. |
% I/I Removed |
The percent of infiltration and inflow that was removed due to the rehabilitation. |
Remaining GPM |
The Remaining GPM is a calculated field based on the percent of I/I removed and the total GPM. |