The Attributes tab allows you document the date the calibration occurred, the reason for the test, and the crew or individual that performed the calibration and any repairs.
Note: The Date Calibrated field is required in order to save the record.
In addition, this tab contains several unique fields. These are defined in the table below:
Field Name |
Use/Purpose |
Meter Data Fields (Size, Meter Type, Register Units) |
These are automatically populated with data from the meter device's inventory record. These fields will appear grayed out and are not editable from this module. |
Meter Readings Fields |
These fields allow you to document the meter reading when the device was initially received and after the calibration has been performed. |
Repair Parts Grid |
This is a comments grid that allows you to document what parts, if any, were repaired. To enter comments, simply place your cursor in the grid and begin typing. |