The Pump Curve tab allows you to document the various pump speeds and elevations. You can also indicate whether this is a variable speed pump. The additional fields in this tab are described in the table below:
Note: All fields under this attribute tab are optional.
Field Name |
Use/Purpose |
Pump On Elev Pump Off Elev Pump Alarm Elev |
These read-only fields are carried over from the Pump Slot record in which this pump is installed. If these fields are blank in the slot location, they will remain blank here. |
Pump Low Speed |
The low speed, in rotations per minute, at which the pump operates. |
Pump High Speed |
The high speed, in rotations per minute, at which the pump operates. |
Shut Off Head L & H |
The head against which the pump produces no flow. |
Low H 1-6 (ft) High H 1-6 (ft) |
The measure of energy added to the water by the pump. |
Low Q 1-6 (gpm) High Q 1-6 (gpm) |
The flow produced by the pump, measured in gallons per minute, at the corresponding head. |