The model runs use the fields at the top of the Default Rehab Work Tasks module to help determine which work tasks will be used on pipes selected for rehabilitation or replacement. These fields and their special functions are described below:
Field Name |
Use/Purpose |
Pipe Material Checkboxes |
Use these checkboxes to indicate when the Rehab and Replacement tasks indicated in this record will be used on the pipes selected in the model runs. Remember, pipes are classified as rigid, brittle, or flexible based on the parameters established in the Material Types module. |
Accessibility Checkboxes |
Use these checkboxes to indicate when the Rehab and Replacement tasks indicated in this record will be used on the pipes selected in the model runs. Remember, pipes are classified as easy or difficult access based on the parameters established in the Accessibility module. |
Surface Type Checkboxes |
Use these checkboxes to indicate when the Rehab and Replacement tasks indicated in this record will be used on the pipes selected in the model runs. Remember, pipes are classified as paved, unpaved, or heavy traffic based on the parameters established in the Surface Types module. |
Min and Max Pipe Diameter Max Depth |
Use these fields to indicate the minimum and maximum pipe diameter and maximum pipe depth (in inches) on which these rehab and replacement work tasks can be used. |
Priority |
Indicate the Priority rating for this record. The system will sort the Default Rehab Work Tasks by priority order (smallest to largest). |
Rehab Work Task Replace Work Task |
Use these two pick lists to select the Rehabilitation and pipe Replacement Work Tasks to which the above criteria will be applied. These pick lists come from the Rehab Work Tasks and Costs module. |
Analysis Type |
Use this pick list to select the type of analysis for which this rehab work task can be applied. Analysis types include structural only, O&M only, and structural and O&M. |