Each Lucity Security Group can be granted access to multiple GIS Views. To control which View opens by default, an administrator must establish default Views.
There are two types of default Views:
Global Default
Applies to every Lucity user.
Group Default
Serves as the default for a specific Group. A Group Default view overrides the Global Default.
For the Group Default map to apply to a user, he or she must:
be part of the assigned Security Group; and
have that Group set as his or her Default Rules Group in Lucity Security.
When the Web Map is opened using the Show in Map tool the following logic is employed to identify which GIS View is displayed:
The system will first try and use the GIS View that is associated to the Lucity module view in which the Show in Map button was clicked.
If no GIS View has been associated to the module view, or the map is not being launched from a module view, the system will open the GIS View associated to the user’s Default Rules Group set in Lucity Security.
If there is not a GIS View associated to the user’s Default Rules Group, the system will open the system default GIS View.
If no GIS View has been assigned the system default, a random GIS View will be used.
Open the GIS View that you want to be a Global Default.
In the Web Map, click the Design Mode button. The Design Mode pop-up appears:
Select Default Settings from the pop-up. The following screen appears:
Click the Make This GIS View The Global Default button.
Click the Close button.
Click the Save button on the Design Mode pop-up. The selected GIS View now serves as the default for any Lucity users not assigned to a Default Rules Group or whose Default Rules Group does not have a Default GIS View.
Open the GIS View that you want to be a Group Default for editing.
In the Web Map, click the button. The Design Mode pop-up appears:
Select Default Settings from the pop-up. The following screen appears.
In the Available Groups grid on the left, locate the Group to which you would like to assign this GIS View as a default.
Click the Assign button next to the group name. The group name appears in the Groups Using This Map as Default list on the right.
Repeat Steps 4-5 for any other Groups that should use this GIS View as their default view.
Click the Close button.
Click the Save button on the Design Mode pop-up. This GIS View now serves as the default for any user who has one of the designated Groups set as his or her Default Rules Group.
Note: A Default Rules Group can determine which module views, GIS Views, and Dashboard Shared Tab Groups a user sees by default.
Open the Lucity Security program.
From the menu, select Security > Users/Groups Setup. The User and Group Assignments window opens:
In the Users grid, select the user you would like to assign a Default Rules Group.
Check the Associated Groups list in the bottom-left corner to determine whether the user is associated with Group you want to select as their desired Default Rules Group.
If the user is not associated with the desired group:
Select the user.
Select the desired Group.
Select the Associate button between the Users and Groups grids. The selected Group now appears in the user's Associated Groups list.
Select the Edit User(s) button. The following pop-up appears:
Use the Default Rules Group drop-down to select the desired Group.
Select OK. The selected Group is now the user's Default Rules Group.
Logic Behind which GIS View is opened in the Lucity Web Map 
button. The Design Mode pop-up appears:
