The Monitoring tab supplies five groups of fields for documenting the motor and seal conditions, as well as electrical monitoring, vibration monitoring, temperature monitoring, and rotational monitoring. The motor and seal condition fields are user-defined, code-description pick lists. All other fields within this tab are numerical.
Condition |
Description |
Motor Condition |
Code-description pick list used to rate the pump motor's condition. |
Seal Condition |
Code-description pick list used to rate the pump seal's condition. |
Electrical Monitoring |
Description |
Volts |
The voltage of each leg on a three-phase motor. |
L.R. Amps |
The locked rotor amperes on each leg on a three-phase motor. |
Running Amps |
The running amperes of each leg on a three-phase motor. |
Vibration Monitoring |
Description |
VM Pump |
The vibration reading at the pump, in inches per second. |
VM Motor |
The vibration reading at the motor, in inches per second. |
VM Shaft |
The vibration reading at the shaft, in inches per second. |
VM Reducer |
The vibration reading at the reducer, in inches per second. |
VM Frame |
The vibration reading at the frame, in inches per second. |
Temperature Monitoring |
Description |
TM MCC |
The temperature reading on the motor controller, in degrees fahrenheit . |
TM Motor |
The temperature reading on the motor, in degrees fahrenheit. |
TM Bearing |
The temperature reading on the bearing, in degrees fahrenheit. |
TM Lighting |
The temperature reading on the lighting, in degrees fahrenheit. |
Rotational Monitoring |
Description |
1st Speed |
The motor revolutions per minute. |
2nd Speed |
If the motor has two speeds, record the second speed in this field. |