These fields are located on the left-hand side of the screen above. These settings are used by the system to determine which rehab technique is appropriate for each individual street. The data in these fields indicate whether a curb is required and what PCI range will trigger selection of the rehab method included in this module. The data in these fields is carried over from the Rehab Techniques module when a Pavement Rehab type is selected in the header.
Default Trigger |
Description |
Requires Curb |
If this box is marked, the supersegment's curb length has to be greater than zero in order for this rehab technique to be selected. |
Requires No Curb |
If this box is marked, the supersegment's curb length has to be equal to zero in order for this rehab technique to be selected. |
Min PCI |
This is the minimum PCI value that the supersegment can have in order to be selected for this rehabilitation activity. For a particular rehab type to be selected, the street's PCI must fall between the minimum and maximum PCI's defined in this module. If a street's PCI falls between the minimum PCI and Breakpoint PCI, it is considered to be in a Key Zone. A Key Zone street is one that is given a higher rehabilitation priority in the model runs. |
Breakpoint PCI |
This sets the high end of the Key Zone for this rehabilitation method. If a street's PCI falls between the minimum PCI and Breakpoint PCI, it is considered to be in a Key Zone. A Key Zone street is one that is given a higher rehabilitation priority in the model runs. |
Max PCI |
This is the maximum PCI value that the supersegment can have in order to be selected for this rehabilitation activity. For a particular rehab type to be selected, the street's PCI must fall between the minimum and maximum PCI's defined in this module. |
Note: These fields can be edited by the user.