Toolkit

The Toolkit in the Rehab Model module provides the following function:

Function

Result

Run Model

Once the user has completed the model setup in the Parameters tab and all necessary information is configured in the Model Setup modules, the user runs the model using the Toolkit function.

How To Run the Model

  1. Find the correct Rehab Model record.
  2. Click the button in the module toolbar. The following window appears:

    toolkit

  3. Highlight Run Model and click . The following window appears:

    Model

  4. Select which one or more models to run from the Available Rehab Models grid.

    Note:  Multiple models can be run at the same time.

  5. Enter the Date and Time for the system to begin the model runs.  To begin immediately, leave these fields blank.

    Note: If you choose to run the model overnight, the computer where the model run was initiated must remain turned on and logged into Lucity Desktop for the model to complete its run.

  6. Click OK to begin the model run.
  7. The following screen appears to display the status of the model run. The most recent activity appears at the top of the list. To view a history of what has been accomplished, read the list from bottom to top. When the process is complete, the notation End of Model Run appears at the top of the list.

    end of process

  8. Click the Stop button to close the window and review the Pipe Results tab.