The Pump Curve tab allows you to document the pump elevations and indicate whether this is a variable speed pump. You can also document the Shut-off heads and Low H, Low Q, High H, and High Q. These fields and their uses are described below. All fields under this attribute tab are optional.
Field Name |
Definition |
Pump On Elev Pump Off Elev Pump Alarm Elev |
These read-only fields are carried over from the Pump Slot record in which this pump is installed. If these fields are blank in the slot location, they will remain blank here. |
Low Speed (rpm) |
This is the low speed in rotations per minute at which the pump operates. |
High Speed (rpm) |
This is the high speed in rotations per minute at which the pump operates. |
Shutoff Head (l & H) |
The head against which the pump produces no flow. |
Low H 1-6 |
Head points for the pump at low (or normal if not variable) speed. |
Low Q 1-6 |
Discharge points for the pump at low (or normal if not variable) speed. |
High H 1-6 |
Head points for the pump at high speed. |
High Q 1-6 |
Discharge points for the pump at high speed. |