The sewer split tool will split a sewer line in both the geodatabase and Lucity. It can also add a new structure at the split point. This tool must be used instead of the ESRI split tool.
Note: This tool is only enabled if all of the following conditions are met: (1) One feature selected in the map (2) The feature selected is linear.
How To Split a sewer pipe in the map:
In ArcMap, start an edit session.
Select a sewer pipe in the map.
Click the Sewer split tool on the Lucity GISEdit toolbar.
The split tool requires that edits be saved before and after performing the split. One of the following prompts will appear.
Click Yes. Using the mouse, left-click on the line where the pipe will be split. The pointer should automatically snap to the line. If the structure that will split the pipe already exists in the structure feature class, snap the split cursor to the structure.
The following dialog will appear if there is more than one editable sewer structure feature class in the map. Select the feature class that will contain the split structure.
Click OK and the following form will appear
Existing From Point: This is read-only information for the existing upstream structure.
Existing Pipe: This is read-only information for the existing pipe.
Existing To Point: This is read-only information for the existing downstream structure.
Conflicting Pipe length: This option is only enabled when the length of the pipe in the desktop is different than the length of the pipe in GIS. If this option is enabled users can choose to set the Lucity length equal to the GIS length or proportionally split the pipe in the desktop to match the split in GIS.
New Alt Pipe ID for US Pipe (Optional): Users can manually enter an Alt Pipe ID for the new upstream pipe, use a Lucity auto number (this is only enabled if an auto number is set up), use end point IDs, or use the existing pipe's Alt Pipe ID.
New Split Point (Required): The new structure must be assigned a Facility ID before proceeding. Users have the option to manually enter the Facility ID or use a Lucity auto number (this is only enabled if the option is setup in Geodatabase Configuration tool). Note: If a structure already existed at the point along the line where the split is performed then this section will be disabled and will contain the existing structure information.
New Alt Pipe ID for DS Pipe (Optional): Users have the option to manually enter an Alt ID for the new downstream pipe, use a Lucity auto number (this is only enabled if an auto number is set up), or use end point IDs.
Archive: (Optional) Select this option to maintain a record in the Lucity pipe inventory module for the pre-split pipe. The pre-split pipe will not be deleted from the Lucity inventory module if this option is selected.
If the option to archive is selected, users can set a status for the pre-split pipe. The status box lists the status types that are defined in the status pick list field in the desktop sewer pipe inventory module.
Selecting this option will update the following information for the pre-split pipe.
The pipe status will be updated to the status selected from the list.
The ability to create requests, work orders and PM/Work Template records against the pre-split pipe is disabled. This is done by the tool updating the NT_NOWORK field.
The show in map is disabled for the pipe.
Advanced Settings: This allows users to override the default settings that control what associations should be updated with the use of this tool. The following boxes are checked by default:
If not archiving pipes:
Inspections
Overflows
Requests
Work Orders
PM/Work Templates
If archiving pipes:
PM/Work Templates
7. After making all desired selections, click OK.
8. The following message will appear when the process is finished.
The sewer split tool will split a sewer line in both the geodatabase and Lucity. It can also add a new structure at the split point. This tool must be used instead of the ESRI split tool.
