The Inspection Setup tab stores general inspection data, such as the inspection date, the inspection crew, purpose, prior maintenance, and overall pipe condition. Some fields in this tab have a unique purpose or are required to save the record. These are described in the table below:
Field Name |
Use/Purpose |
Date Inspected
|
Use this field to indicate the date the inspection took place. Note: This field is required in order to save the record. |
Inspection Direction |
This field allows you to indicate the direction in which the inspection was performed (i.e. upstream to downstream or downstream to upstream). Note: This field is required in order to save the record. |
Tape ID |
If a TV Inspection was performed, use this field to include the identification number of the tape. |
Counter Start Counter Stop |
If a TV Inspection was performed, use these fields to include the numbers on the tape counter where the pipe inspection begins and ends. |
Percent Full |
Use this field to indicate what percentage of the pipe was full of water or debris. |
Flow Depth |
The total depth of liquid and obstructions, in inches, measured to the nearest quarter inch. |
Debris Depth |
The approximate depth of obstructions flowing/settling in the pipe, in inches. |
Debris Type |
The type of obstructions observed in the pipe during the inspection. |
Flow Velocity |
Flow speed in the pipe measured in feet per second. |
Cleaning Rec |
Use this field to indicate if the inspector recommends cleaning for the pipe. |
Total Structure # Field |
The Total Structure # field automatically sums all the assigned structure numbers from the Structure # field in each observation record. This number can then be used to determine the overall condition of the pipe. |
Next Insp Date |
The date for the next recommended inspection. |