Meter Info Tab

The Meter Info tab features three read-only grids: Meter Location, Currently Installed Meter Device, and Currently Installed AMR Device. These grids are automatically  populated with information from the Meter Location module. A meter record must first be associated with the service tap before any data can be carried over into these grids. More specifically, the Service Tap No field in the Meter Location record must be populated.

• The Meter Location grid is automatically populated with the meter's general location, operating status, and other installation information.
• The Meter Device grid is automatically populated with the currently installed meter device data, such as meter device number, operating status and type.

  Note: A meter device must be associated with the meter in the Meter/AMR Reading tab of the Meter Location record.

• The AMR grid is automatically populated with the currently installed AMR data, such as the AMR device number, operating status and type.

  Note: An AMR meter device must be associated with the meter in the Meter/AMR Reading tab of the Meter Location record.