The Construction tab is used to document information about the conduit's construction, including the construction date, the individual or company that designed the project, the contractor name, and project number. In addition, users can record the district and section/township/range in which this conduit resides.
Fields that are unique to conduit construction are described in the table below:
Index Number |
A secondary, user-defined identifier for the conduit. |
Land Use |
The type of land use in the area surrounding the conduit (i.e., residential, commercial, industrial). |
US Stationing DS Stationing |
The upstream and downstream structure stations as shown on the construction plans. |
Sub Area |
A secondary group or location identifier. |
Design Flow |
The flow rate for which the conduit was designed. |
Average Depth |
The average depth of the conduit, in feet. |
HGL US Invert HGL DS Invert |
The hydraulic grade line at the upstream and downstream structures. |
Bedding Type |
The material lying underneath the conduit in the ground (e.g., dirt, gravel, sand) to provide better control of its environment. |
Maintenance Area |
Indicates whether the conduit is located in a maintenance area or right-of-way. |
Joint Material |
The type of joint used at each pipe section. |
Pipe Sec Length (ft) |
The length of the pipe section or joint, in feet. |
Note: All fields in this tab are optional.