Attributes

Field Name

Definition

Boost Percent

Use this field to indicate the tap setting for increasing the capacity achieved by raising the maximum voltage level.

Buck Percent

Use this field to indicate the tap setting for increasing the capacity achieved by lowering the minimum voltage level.

Bypass Switch

This field allows you to indicate if a bypass switch is present. Bypass switches are used to de-energize voltage regulators.

Rated kVA A, B, and C

Use this field to indicate the Rated kVA (kilovolt-amperes) at nominal voltage.

H Side Config

The high side configuration field represents the configuration of the primary side of the transformer. Use the pick list to identify Single Phase Line-Ground, Open, Single Phase Line-Line, Wye, etc.

H Side Protect

The high side protection field allows you to indicate the type of overcurrent protection used at the primary side of the transformer. For example, Breaker, Bayonet Fuse, Oil Immersed, Weak Link, etc.

Nominal Voltage

This field represents the rated voltage of the transformer.

Operating Voltage

Use this field to identify the actual operating system voltage of the transformer.

Magnetic Reactance and Resistance

Use these fields to indicate the magnetizing reactance and resistance, in ohms.

HS Ground React and Resist

Use these fields to indicate the ground reactance and resistance of the primary side (high side), in ohms.

Ground Reactance and Resistance

Use these fields to indicate the neutral-to-ground reactance and resistance of ground.

Feeder ID 1 and 2

Use the first field to include the feeder manager identifier assigned to the feeder and devices that participate in a specific distribution circuit. Use the second ID field if the device is supplied by a second feeder.