Active Elevations

This set of data consists of the active elevations of the pipe segment at the manholes. The purpose of this data is to standardize all references to elevation data. The active elevations and the statuses are all assigned by running the Set Elevations tool (located under Sewer > System Tools). These elevations can be modified if desired. However, to keep the Set Elevations tool from overwriting the manually entered values the the Invert and Elevation locks must be checked.

Active Elev

US Rim	The rim elevation of the upstream structure.
DS Rim	The rim elevation of the downstream structure.
US Invert	Flow channel elevation at the structure.
DS Invert	Flow channel elevation at the structure.
Status Fields	The status of each elevation and the information that determined the active selection. For information on the status codes, refer to the Set Elevations tool help guide.
Elevation Lock Invert Lock	Stops the Set Elevations tool from overwriting the value entered into that row of fields.