Condition Ratings Tab

The Condition Ratings tab contains fields that display the Structural and O&M ratings for the inspected structure. These fields are automatically populated by the system based on the data input from the Observation records.

Field

Function

Quick Rating Structural

This field is a code that displays quick information about the Structural results of the inspection. It is put together using fields from the Observation records.

Quick Rating O&M

This field is a code that displays quick information about the O&M results of the inspection. It is put together using fields from the Observation records.

Quick Rating Total

This field is a code that displays quick information about the results of the inspection. It is put together using fields from the Observation records.

Pipe Ratings Structural

This provides an overall Structural Rating for the entire storm structure. A sum of all the Structural Grade fields from all the observations.

Pipe Ratings O&M

This provides an overall Structural Rating for the entire storm structure. A sum of all the O&M Grade fields from all the observations.

Pipe Ratings Total

This provides an overall rating for the entire storm structure. A sum of the Pipe Ratings Structural and Pipe Ratings O&M fields.

Rating Index Structural

This provides an average rating per structural defect.

Rating Index O&M

This provides an average rating per O&M defect.

Rating Index Total

This provides an average rating per defect.

Note: For more information about how these fields are calculated check out the Grading System example.

At the bottom of this tab is a grid that displays all the Observation records for the inspection.

A sample of the grid appears below. Sort records in the grid by clicking on the headings. An up or down arrow (highlighted in orange below) will appear signifying ascending or descending order.

Right-click in the grid to add a record

Right-click on an existing record to get a menu with options to View Record, Add Record, Edit Record, or Delete Record.

Double-click on an existing record to open it

Right-click in the grid and select Add Record. The following dialog will appear:
Record the Distance to the feature location. This distance can be measured in feet or meters.
Note: This field is required.
Use the MACP Code field to select a defect's Code/Description. Click the caption button or click in the find and press F9 for a picklist.
Note: These codes comply with the NAASCO MACP standards and are used to calculate the read-only Structural and O&M fields in this record.

Note: This field is required.
Fill out the other fields as needed.
Save and Close the record. For more information about Observation records go here.