Condition Ratings Tab

The Condition Ratings tab displays the Structural and O&M ratings for the inspected pipe. These fields are populated by the system, based on data from the Observation records.

Note: The

Recalculate Filter Set toolkit must be run to populate these fields.

The tool automatically runs and updates all calculated fields on all inspections in the filterset.

Field

Function

Quick Rating Structural

Summarizes the structural results of the inspection. This rating is established using fields from the Observation records.

Quick Rating O&M

Summarizes the O&M results of the inspection. This rating is established using fields from the Observation records.

Quick Rating Total

Summarizes the overall results of the inspection. This figure is established using fields from the Observation records.

Pipe Ratings Structural

Provides an overall Structural Rating for the entire pipe. It is a sum of all the Structural Grade fields from all the observations.

Pipe Ratings O&M

Provides an overall O&M Rating for the entire pipe. It is a sum of all the O&M Grade fields from all the observations.

Pipe Ratings Total

Provides an overall rating for the entire pipe. It is a sum of the Pipe Ratings Structural and Pipe Ratings O&M fields.

Rating Index Structural

Provides an average rating per structural defect.

Rating Index O&M

Provides the average rating per O&M defect.

Rating Index Total

Provides the average rating per defect.

Survey Length

Indicates the length of the survey.

# of TV Connections

Displays the number of sewer lateral connections made to the pipe. This field is automatically populated using the Building Conn field on the Observations records.

Rehab Method

Indicates the suggested rehab method.

Note: For more information about how these fields are calculated, check out the Grading System example.

At the bottom of this tab is a grid that displays all the Observation records for the inspection.

A sample of the grid appears below. Sort records in the grid by clicking on the headings. An up or down arrow (highlighted in orange below) indicates whether data appear in ascending or descending order.

Right-click in the grid to add a record.

Right-click on an existing record for options to View Record, Add Record, Edit Record, or Delete Record.

Double-click on an existing record to open it.

Right-click in the grid and select Add Record. The following dialog will appear:
Record the Distance to the feature location. This distance can be measured in feet or meters.
Note: This field is required.
Use the Defect field to select the defects Code/Description. Click the caption button or click in the find and press F9 for a picklist.
Note: These codes comply with the NAASCO PACP standards and are used to calculate the read-only Structural and O&M fields in this record.

Note: This field is required.
Fill out the other fields as needed.
Save and Close the record. For more information about Observation records go here.